1. Specifications:
1) Round bar:
Diameter: 8mm-2000mm
2) Plate/Sheet:
Thickness: 2mm-200mm
3) Pipe/Tube:
OD: 80mm-3000mm Thickness: 0.3-20mm
4) Coil:
Thickness: 0.3-80mm, Width: 1000-2000mm
5) Forgings:
Weight: 0.5-10000Kg
Note: We can supply any length based on the customer's requirement.
2. Chemical Composition
C
Si
Mn
P
S
Cr
Ni
Mo
0.33-0.45
1.00
1.00
0.040
0.015
3.Introduction:
Inconel 600 is a nickel-chromiumsuper alloy. It is readily weldable and non-magnetic in nature and used in various corrosion resisting applications. The chromium content of the Inconel 600 provides resistance to weaker oxidizing environments while the high nickel content provides exceptional resistance to chloride stress corrosion cracking and a level of resistance to reducing environments .
4. Application:
The alloy is used extensively in the chemical industry for its strength and corrosion resistance. Applications include heaters, stills, bubble towers, and condensers for processing of fatting acids; evaporator tubes, tube sheets, and flaking trays for the manufacture of sodium sulfide; and equipment for handling abietic acid in the manufacture of paper pulp.
The alloy's strength and oxidation resistance at high temperatures make it useful for many applications in the heat treating industry. It is used for retorts, muffles, roller hearths, and other furnace components and for heat treating baskets and trays.
In the aeronautical field, alloy 600 is used for a variety of engine and airframe components, which must withstand high temperatures. Examples are lock wire, exhaust liners, and turbine seals.
The alloy is a standard material of construction for nuclear reactors. It has excellent resistance to corrosion by high purity water, and no indication of chloride-ion stress-corrosion cracking in reactor water systems has been detected. For nuclear applications, the alloy is produced to exacting specifications and is designated Inconel® alloy 600T.
5. Finished goods condition: hot forging/hot rolling + annealing/normalizing + tempering/quenching + tempering/any conditions based on the customer's requirement
6. Surface conditions: scaled (hot working finish)/ground/rough machining/fine machining/based on the customer's requirement
7. Furnaces for metallurgical processing: electrode arc + LF/VD/VOD/ESR/Vacuum consumable electrode
8. Ultrasonic inspection: 100% ultrasonic inspection for any imperfections or based on the customer's requirement.
9. UTS: According to SEP 1921 C/c, D/d, E/e; A388 or GB/T 6402
10. Other Products: We can also produce steel products below:
1) Corrosion Resisting Alloy: Monel400, Inconel600, Inconel625, Inconel690, Incoloy800 (H), Incoloy825, HastelloyB, HastelloyB2, HastelloyC-4, HastelloyC-22, HastelloyC-276 and HastelloyG30
2) High-Temperature Alloy: GH30, GH39, GH33 (A), GH37, GH44, GH128, GH132 (A-286), GH145 (Inconel750) and GH169 (Inconel718)
3) Stainless Steel: 1Cr17Ni2 (431), 0~1Cr25Ni20Si2 (310S), 3Cr24Ni7SiNRe, 3Cr17Ni7Mo2N (318), 0Cr17Ni17Mo7Cu2, 00Cr25Ni22Mo2N (U2), 00Cr20Ni24Si4Ti (C6L), 00Cr20Ni25Mo5Cu2 (904L), 0Cr12Ni25Mo3Cu3Si2Nb (941), 0Cr20Ni26Mo3Cu3Si2Nb (RS-2), 0Cr17Ni4Cu4Nb (17-4PH), 0Cr15Ni5Cu2Nb (15-5PH), 0Cr15Ni7Mo2Al (15-7Ph), 0Cr13Ni8Mo2Al (Ph13-8Mo), S45500 (XM-16), S45000 (XM-25), 0Cr26Ni5Mo2 (329J1), 00Cr22Ni5Mo2N (2205) and Y0Cr17(430F)
4) Steel Industrial Moulds: Cr12MoV, Cr12Mo1V1 (D2), 4Cr5MoSiV1 (H13), NAK80 and 3Cr2Mo (P20)
5) A-Structural Steel: 12Cr1MoV, 12CrNi3A, 34CrNi3Mo, 45CrNiMoVA, 40CrNiMoA, 5CrNiMo, 20Cr2Ni4A and FD-1
6) Maraging Steel: 18Ni, 20Ni and 25Ni
7) Cold Rolled Silicon Steel with grain orientation: F30Q130
We are OEM and we serve you with our honesty, integrity, and professional knowledge.