Liquid Silicone Rubber for Gypsum Molds

 Liquid Silicone rubber for gypsum molds
 
Liquid Silicone rubber for gypsum applications
1. Liquid Silicone rubber can used for gypsum crafts, gypsum statues , gypsum ceiling rose , gypsum columns , gypsum line , gypsum ceiling board ,and all kinds of gypsum decorations . 
 
Liquid Silicone rubber for gypsum features
Liquid Silicone rubber is two part silicone with general hardness of 22-50A°after curing with features ------
  high tensile & tear strength   high duplication times Low linear shrinkage  resistance to high-temperature Low shrinkage and non-deformationresistance to acid-alkali and expansion 
Liquid Silicone rubber for gypsum operation instructions 
Step One: Take 100g of part A and add 2g of part B and mix the silicone rubber and curing agent evenly.
 
Step Two: vacuum pumping
Without exception, this step takes less than 10 minutes.
Note: The time for vacuum-pumping should be less than 3—5 minutes ,otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated.
 
Step Three: Pouring the mixture into the frame with original gypsum mold slowly . 
 
Shelf life for Liquid Silicone rubber
10~12months, when stored in a dry & cool place under the room temperature 25.
 
Packing for Liquid Silicone rubber
1kg/ bottle , 5 kg/drum vacuumed packing, 25kgs/drum vacuumed packing,200 kg/drum 
 
Any more information , pls feel free to contact Ms Candy
office no. :086-755-89311348
Mob:086-18938867609
Skype: candy10181125
Email :hyyb(at)szrl(dot)net 
Welcome to our website: 3w(dot) szrl (dot) net
 

Jenova silicone had focused on RTV-2 mold making silicone rubber since 1994.There are two kinds of mold making silicone rubber in our company, which are condensation curedsilicone and addition cured silicone according to their different curing system and applications.These two type of silicone rubber could be applied to make mold for casting material as belowUrethane PlasticUrethane RubberEpoxyPolyester Fiberglass Resin Plaster/Gypsum??SoapWaxLow melt metals (up to 400 degrees Max)HydroCal WhiteHydrocal, Hydrostone??Cement, Concrete and so on.Condensation-cured silicone rubber,also called tin-cured silicone rubber,are two components which can cure at room temperature (RTV) ,with the features of good flexibility ,high tear-strength ,suitable viscosity which could be used to make mold in pouring way and brushing way.It could be used to reproduce the large size products (?1 meter) with complicated patterns,also for the moderate and small size .Its typical applications are as below:??Resin and polyresin casting with different size. ??big plaster or gypsum sculpture Casting ; Decorative Moldings like Ceiling Domes, Pilaster, Balustrade , Faux stone, Faux rock, Concrete garden furniture and fountains,Cladding stoneetc.??Shoe soles molding??Ceramic art and porcelain replicate??Palaeontology and fossil reproduction??Jewellery lost wax master moulds??Candle mould reproduction??Soap mould reproduction ??Tire molding ??Manual mould design ??And so on.??Jenova Platinum cured silicone rubber is two components,and cured at room temperature.Platinum cured silicone is with many good features: high tear resistance, long mold life, virtually no shrinkage, high dimensional stability over time, non-deformability and excellent reproduction of fine detail,also odourless and non toxic etc.[ Buying Categories ] - Rubber & Plastics >> Rubber Raw Materials